FLT-SEC-P-T1-264/50-P, 2907391, Phoenix Contact, Module Thiết bị chống sét nguồn điện 1 pha cấp 1, L-N-PEN, Chống Sét Lan Truyền
Type 1 surge protection plug - FLT-SEC-P-T1-264/50-P - 2907391, 2907391, PHOENIX CONTACT, for L-N and L-PEN
This product is no longer in stock
Availability date:
FLT-SEC-P-T1-264/50-P, 2907391, Phoenix Contact, Module Thiết bị chống sét nguồn điện 1 pha cấp 1, L-N-PEN, Chống Sét Lan Truyền
FLT-SEC-P-T1-264/50-P, 2907391, Phoenix Contact, Module Thiết bị chống sét nguồn điện 1 pha cấp 1, L-N-PEN, Chống Sét Lan Truyền
Type 1 surge protection plug - FLT-SEC-P-T1-264/50-P - 2907391, 2907391, PHOENIX CONTACT, for L-N and L-PEN
Recipient :
* Required fields
or Cancel
FLT-SEC-P-T1-264/50-P, 2907391, Phoenix Contact, Module Thiết bị chống sét nguồn điện 1 pha cấp 1, L-N-PEN, Chống Sét Lan Truyền
Type 1 surge protection plug - FLT-SEC-P-T1-264/50-P - 2907391, 2907391, PHOENIX CONTACT, for L-N and L-PEN
Degree of protection | IP20 |
---|---|
Ambient temperature (operation) | -40 °C ... 80 °C |
Ambient temperature (storage/transport) | -40 °C ... 80 °C |
Altitude | ≤ 2000 m (amsl (above mean sea level)) |
Permissible humidity (operation) | 5 % ... 95 % |
Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
Vibration (operation) | 5g (5 - 500 Hz/2.5 h/X, Y, Z) |
IEC test classification | I / II |
---|---|
T1 / T2 | |
EN type | T1 / T2 |
IEC power supply system | TT |
Mode of protection | L-N |
L-PEN | |
Mounting type | on base element |
Color | light grey RAL 7035 |
Housing material | PA 6.6-FR 20 % GF |
PBT-FR | |
Degree of pollution | 2 |
Flammability rating according to UL 94 | V-0 |
Type | Male |
Number of positions | 1 |
Surge protection fault message | optical |
Nominal voltage UN | 240 V AC (TN) |
---|---|
240 V AC (TT) | |
Nominal frequency fN | 50 Hz (60 Hz) |
Maximum continuous voltage UC | 264 V AC |
Nominal discharge current In (8/20) µs | 50 kA |
Maximum discharge current Imax (8/20) µs | 100 kA |
Impulse discharge current (10/350) µs, charge | 25 As |
Impulse discharge current (10/350) µs, specific energy | 625 kJ/Ω |
Impulse discharge current (10/350) µs, peak value limp | 50 kA |
Follow current interrupt rating Ifi | 50 kA |
Short-circuit current rating ISCCR | 50 kA |
Voltage protection level Up | ≤ 2.5 kV |
Residual voltage Ures | ≤ 2.5 kV (at In) |
Front of wave sparkover voltage at 6 kV (1.2/50) µs | ≤ 2.5 kV |
TOV behavior at UT | 415 V AC (5 s / withstand mode) |
760 V AC (120 min / withstand mode) | |
Response time tA | ≤ 100 ns |
Max. backup fuse with branch wiring | 500 A (gG) |
SPD Type | 1CA |
---|---|
Maximum continuous operating voltage MCOV | 264 V AC |
Nom. voltage | 240 V AC |
Mode of protection | L-N |
L-G | |
Power distribution system | Single phase |
Nominal frequency | 50/60 Hz |
Voltage protection rating VPR | 1500 V |
Nominal discharge current In | 20 kA |
Short-circuit current rating (SCCR) | 50 kA |
China RoHS | Environmentally Friendly Use Period = 50 years |
---|---|
For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
ECLASS 10.0.1 | 27130890 |
---|---|
ECLASS 11.0 | 27130890 |
ECLASS 4.0 | 27130800 |
ECLASS 4.1 | 27130800 |
ECLASS 5.0 | 27130800 |
ECLASS 5.1 | 27130800 |
ECLASS 6.0 | 27130800 |
ECLASS 7.0 | 27130802 |
ECLASS 9.0 | 27130890 |
UNSPSC 13.2 | 39121620 |
---|---|
UNSPSC 18.0 | 39121620 |
UNSPSC 19.0 | 39121620 |
UNSPSC 20.0 | 39121620 |
UNSPSC 21.0 | 39121620 |