Type 1+2 combined lightning current and surge arrester - FLT-SEC-P-T1-3C-440/35-FM - 2905988, 2905988, PHOENIX CONTACT
Type 1+2 combined lightning current and surge arrester - FLT-SEC-P-T1-3C-440/35-FM - 2905988, 2905988, PHOENIX CONTACT
Type 1+2 combined lightning current and surge arrester - FLT-SEC-P-T1-3C-440/35-FM - 2905988, 2905988, PHOENIX CONTACT
-
Home
-
Products
-
Surge protection and interference filters
-
Surge protection for power supplies
-
Type 1+2 combined lightning current and surge arrester
-
Product list Type 1+2 combined lightning current and surge arrester
- Type 1+2 combined lightning current and surge arrester - FLT-SEC-P-T1-3C-440/35-FM - 2905988
Type 1+2 combined lightning current and surge arrester - FLT-SEC-P-T1-3C-440/35-FM - 2905988
Your advantages
- Surge protection family for universal use with optimum energy coordination from the lightning current arrester to the device protection
- Easy to maintain due to consistently pluggable protection modules
- Excellent level of information provided by mechanical/visual status indicator and remote indication contact
- Optimum protective effect in the event of high-energy lightning currents, thanks to spark gap technology with low residual voltage characteristic
- Maximum performance in a minimum amount of space: compact design with high discharge capacity at high nominal voltage
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Back to top
Ambient conditions
| Degree of protection | IP20 (only when all terminal points are used) |
|---|---|
| Ambient temperature (operation) | -40 °C ... 80 °C |
| Ambient temperature (storage/transport) | -40 °C ... 80 °C |
| Altitude | ≤ 2000 m (amsl (above mean sea level)) |
| Permissible humidity (operation) | 5 % ... 95 % |
| Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
| Vibration (operation) | 5g (5 - 500 Hz/2.5 h/X, Y, Z) |
General
| IEC test classification | I / II |
|---|---|
| T1 / T2 | |
| EN type | T1 / T2 |
| IEC power supply system | TN-C |
| IT | |
| Mode of protection | L-PE |
| L-PEN | |
| Mounting type | DIN rail: 35 mm |
| Color | light grey RAL 7035 |
| traffic grey A RAL 7042 | |
| Housing material | PA 6.6-FR 20 % GF |
| PBT-FR | |
| Degree of pollution | 2 |
| Flammability rating according to UL 94 | V-0 |
| Type | DIN rail module, two-section, divisible |
| Number of positions | 3 |
| Surge protection fault message | Optical, remote indicator contact |
Protective circuit
| Nominal voltage UN | 400/690 V AC (TN-C) |
|---|---|
| 400 V AC (IT) | |
| Nominal frequency fN | 50 Hz (60 Hz) |
| Maximum continuous voltage UC | 440 V AC |
| Rated load current IL | 125 A (< 55 °C) |
| Residual current IPE | < 5 µA |
| Nominal discharge current In (8/20) µs | 35 kA |
| Maximum discharge current Imax (8/20) µs | 50 kA |
| Impulse discharge current (10/350) µs, charge | 17.5 As |
| Impulse discharge current (10/350) µs, specific energy | 310 kJ/Ω |
| Impulse discharge current (10/350) µs, peak value limp | 35 kA |
| Follow current interrupt rating Ifi | 50 kA |
| Short-circuit current rating ISCCR | 50 kA |
| Voltage protection level Up | ≤ 2.5 kV |
| Residual voltage Ures | ≤ 2.5 kV (at In) |
| ≤ 2.7 kV (at Imax) | |
| ≤ 2 kV (at 17.5 kA) | |
| ≤ 1.7 kV (at 7 kA) | |
| ≤ 1.5 kV (at 3.5 kA) | |
| TOV behavior at UT | 580 V AC (5 s / withstand mode) |
| 800 V AC (120 min / withstand mode) | |
| 1640 V AC (200 ms / safe failure mode) | |
| Response time tA | ≤ 100 ns |
| Max. backup fuse with V-type through wiring | 125 A (gG) |
| Max. backup fuse with branch wiring | 400 A (gG) |
Indicator/remote signaling
| Switching function | Changeover contact |
|---|---|
| Operating voltage | 12 V AC ... 250 V AC |
| 125 V DC (200 mA DC) | |
| Operating current | 10 mA AC ... 1 A AC |
| 1 A DC (30 V DC) | |
| Connection method | Plug-in/screw connection via COMBICON |
| Screw thread | M2 |
| Tightening torque | 0.25 Nm |
| Stripping length | 7 mm |
| Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
| Conductor cross section solid | 0.14 mm² ... 1.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
Connection data
| Connection method | Screw connection |
|---|---|
| Screw thread | M5 |
| Tightening torque | 4.5 Nm |
| Stripping length | 18 mm |
| Conductor cross section flexible | 2.5 mm² ... 35 mm² |
| Conductor cross section solid | 2.5 mm² ... 35 mm² |
| Conductor cross section AWG | 13 ... 2 |
| Connection method | Fork-type cable lug |
| Conductor cross section flexible | 1.5 mm² ... 16 mm² |
UL specifications
| SPD Type | 2CA |
|---|---|
| Maximum continuous operating voltage MCOV (L-L) | 880 V AC |
| Maximum continuous operating voltage MCOV (L-G) | 440 V AC |
| Nom. voltage | 400 V AC |
| 400/690 V AC | |
| Rated load current IL | 50 A |
| Mode of protection | L-L |
| L-G | |
| Power distribution system | Delta |
| Wye | |
| Nominal frequency | 50/60 Hz |
| Voltage protection rating VPR (L-L) | 3000 V |
| Voltage protection rating VPR (L-G) | 1800 V |
| Nominal discharge current In | 20 kA |
| Short-circuit current rating (SCCR) | 25 kA |
UL indicator/remote signaling
| Operating voltage | 125 V AC |
|---|---|
| Operating current | 1 A AC |
| Tightening torque | 4 lbf-in. |
| Conductor cross section AWG | 30 ... 14 |
Environmental Product Compliance
| REACh SVHC | Lead 7439-92-1 |
|---|---|
| N,N-dimethylacetamide 127-19-5 | |
| China RoHS | Environmentally Friendly Use Period = 50 years |
| For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” |
Classifications
ECLASS
| ECLASS 10.0.1 | 27130802 |
|---|---|
| ECLASS 11.0 | 27130802 |
| ECLASS 4.0 | 27130800 |
| ECLASS 4.1 | 27130800 |
| ECLASS 5.0 | 27130800 |
| ECLASS 5.1 | 27130800 |
| ECLASS 6.0 | 27130800 |
| ECLASS 7.0 | 27130802 |
| ECLASS 9.0 | 27130802 |
UNSPSC
| UNSPSC 13.2 | 39121620 |
|---|---|
| UNSPSC 18.0 | 39121620 |
| UNSPSC 19.0 | 39121620 |
| UNSPSC 20.0 | 39121620 |
| UNSPSC 21.0 | 39121620 |
