V50-1+NPE+FS-385, 5093 59 0, 5093590, chống sét, chống sét lan truyền, cắt lọc sét 1 pha, chống sét nguồn điện OBO, Hahitech
V50-1+NPE+FS-385, 5093 59 0, 5093590, chống sét, chống sét lan truyền, cắt lọc sét 1 pha, chống sét nguồn điện OBO, Hahitech
V50-1+NPE+FS-385, 5093 59 0, 5093590, chống sét, chống sét lan truyền, cắt lọc sét 1 pha, chống sét nguồn điện OBO, Hahitech
Combination arrestor V50 in 385 V with NPE, type 1+2
Combination arrestor V50, 1-pole + NPE with FS 385 V
Lightning current combination arrestor, type 2
• For the equipotential bonding of lightning current to VDE 0185-305 (IEC 62305)
• Lightning current discharge capacity of 12.5 kA (10/350) per pole and up to 50 kA(10/350) in total
• Modular, plug-in arrestor with dynamic cut-off unit and visual status display
• Locking mechanism with vibration protection and voltage keying
• Halogen-free plastic (UL 94 V-0)
• The remote signalling (FS) variants have a potential-free changeover contact for remote signalling
Application: Lighting current equipotential bonding for buildings of class III and IV.
|
V50-1+NPE+FS-385 |
|||
|
Article number |
5093 59 0 |
||
|
SPD to EN 61643-11 |
Type 1+2 |
||
|
SPD to IEC 61643-11 |
Class I+II |
||
|
SPD to UL 1449 |
|
|
Type 4 |
|
Nominal voltage AC (50 / 60 Hz) |
Un |
V |
350 |
|
Maximum continuous voltage AC |
UC |
V |
385 |
|
Nominal discharge current (8/20 μs) |
In / L-N |
kA |
30 |
|
Maximum discharge current (8/20 μs) |
Imax |
kA |
50 |
|
Lightning surge current (10/350 μs) |
Iimp |
kA |
12,5 |
|
Total discharge current (10/350) |
Itotal |
kA |
- |
|
Arrester surge current (8/20 μs) [total] |
Itotal |
kA |
- |
|
Protection level [L-N] |
Up |
kV |
1,8 |
|
Protection level [L-N] @ 1 kA |
Ures |
kV |
1,1 |
|
Protection level [L-N] @ 5 kA |
Ures |
kV |
1,2 |
|
Max. mains-side overcurrent protection gL/gG |
|
A |
160 |
|
Short-circuit resistance for max. mains-side overcurrent protection |
|
kA eff |
50 |
|
Operating temperature range |
Tu |
°C |
-40 - +80 |
|
Protection rating |
|
|
IP20 |
|
Approvals |
|
|
UL, ÖVE, VDE |
|
FM contacts |
|
|
Changeover |
|
Switching power AC |
|
|
230 V; 0,5 A |
|
Switching power DC |
|
|
230 V; 0,1 A / 75 V; 0,5 A |
|
Connection cross-section, FM terminals |
|
|
0,5 - 1,5 mm² |
|
Connection cross-section, FM terminals |
|
|
21 - 16 AWG |
|
Cable cross-section, flexible (fine-wire) |
|
|
1.5 - 35 mm² |
|
Rigid cable cross-section (single wire/multiwire) |
|
|
1.5 - 35 mm² |
|
Cable cross-section, flexible (fine-wire) |
|
|
16 - 2 AWG |
|
Rigid cable cross-section (single wire/multiwire) |
|
|
16 - 2 AWG |
