- Hakel > Products > Photovoltaic systems > Lightning and surge arresters – (TYP 1 +2) > PIVM PV 800 Vseries
PIVM PV 800 Vseries, Hakel PIVM PV 800 Vseries, chống sét nhà máy quang năng, chống sét hệ thống pin quang năng, chống sét
PIVM PV 800 Vseries, Hakel PIVM PV 800 Vseries, chống sét nhà máy quang năng, chống sét hệ thống pin quang năng, chống sét
PIVM PV 800 Vseries, Hakel PIVM PV 800 Vseries, chống sét nhà máy quang năng, chống sét hệ thống pin quang năng, chống sét
PIVM PV 800 are the lightning and surge arresters type 1+2 according to EN 61643-11 and IEC 61643-11 and UTE C 61-740-51. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0-2 (according to IEC EN 62305) for equipotential bonding of positive and negative busbars of photovoltaic systems and elimination of transient overvoltage that originates during the atmospheric discharges or switching processes. Particular varistor sectors, connected between the terminals L+, L- and PE, are equipped with internal disconnectors, which are activated when the varistors fail (overheat). Operational status indication of these disconnectors is partly visual (discoloration of the signal field) and partly remote monitoring (by potential free change over contacts – only DS types).
The marking M specifies a type of construction with removable module.
Internal wiring diagram
Dimension drawing
Installation diagram
PARAMETERS
| Test class according to EN 61643-11 ed. 2 and IEC 61643-11 | TYP1+2, CLASS I+II | |
| Maximum continuous operating voltage | UC | 800 V DC |
| Open circuit voltage of PV generator | UOCSTC | U OCSTC < U cpv /1,2 = 730 V |
| Short circuit withstand | ISCWPV | 100 A |
| Impulse discharge current for class I test (10/350) | Iimp | 6,5 kA |
| Charge L/N | Q | 3,25 As |
| Specific energy for class I test L/N | W/R | 10 kJ/Ω |
| Application | L+/L-, L+/PE, L-/PE | |
| Maximum discharge current | Imax | 40 kA |
| Nominal discharge current for class II test (8/20) | In | 15 kA |
| Voltage protection level at In (L+/L-) | Up | < 3,3 kV |
| Voltage protection level at In (L/PE) | Up | < 1,65 kV |
| Response time | tA | < 25 ns |
| LPZ | 0-1 | |
| Housing material | Polyamid PA6, UL94 V-0 | |
| Degree of protection of enclosure | IP20 | |
| Operating temperature | ϑ | -40°C ... +70 °C |
| Cross-section of the connected conductors (at tightening moment of clamps 3 Nm) | 25 mm2 (solid) 16 mm2 (wire) |
|
| Method of assembly | DIN rail 35 mm | |
| Failure signalisation (S) | green - ok / red - failure | |
| Weight | m | 390 g |
| Lifetime | min.100 000 h | |
| Article number | 16 073 |
CERTIFICATIONS
DOWNLOADS
| Catalogue |
