MLP1-230L-W-2L, MLP1-230L-W/DL, MLP2-230L-P, MLP2-230S-P, MLP2-230S-P/RS, chống sét đèn LED, chống sét lan truyền
MLP1-230L-W-2L, MLP1-230L-W/DL, MLP2-230L-P, MLP2-230S-P, MLP2-230S-P/RS, chống sét đèn LED, chống sét lan truyền
MLP1-230L-W-2L, MLP1-230L-W/DL, MLP2-230L-P, MLP2-230S-P, MLP2-230S-P/RS, chống sét đèn LED, chống sét lan truyền
MLP SERIES : MLP
MLP series Type 2 and 3 surge protector for LED outdoor lighting
MLP1-230L-W
- Type 2 or 3 surge protector
- For LED lighting system
- Class I
- Very compact dimensions
- Max. discharge current 10kA
- EN 61643-11, IEC 61643-11 compliance
The MLP range is a comprehensive series of AC surge protectors
dedicated to LED lighting system. Some versions are
equipped with an extra dataline surge protection (RS485 or
DALI) in order to provide a full solution for LED systems with
transmission features. By this way the MLP range is able to provide
all the existing configurations with an efficient solution .
MLP surge protectors are based on a powerful association of
MOV and GDT components, able to protect LED system against
huge surges without disconnection.
In the worse case, the SPD will fail in safety condition. Indication
of the SPD failure is performed through power supply cut off
and/or through remote signaling feature.
dedicated to LED lighting system. Some versions are
equipped with an extra dataline surge protection (RS485 or
DALI) in order to provide a full solution for LED systems with
transmission features. By this way the MLP range is able to provide
all the existing configurations with an efficient solution .
MLP surge protectors are based on a powerful association of
MOV and GDT components, able to protect LED system against
huge surges without disconnection.
In the worse case, the SPD will fail in safety condition. Indication
of the SPD failure is performed through power supply cut off
and/or through remote signaling feature.
Select a reference :
Citel model : MLP1-230L-W
Part Number : 711211Click on the blocks to display detailed characteristics
| Electrical characteristics |
Hide details
|
|---|
| SPD type follow test IEC 61643-11 |
2/3 | |
| Network |
220-240 V single-phase | |
| AC system |
TT-TN | |
| Nominal line voltage |
230-277 Vac | |
| Max. AC operating voltage L-N |
305 Vac | |
| Temporary Over Voltage (TOV) Charasteristics - 5 sec. without disconnection |
580 Vac withstand | |
| Temporary Over Voltage (TOV) Charasteristics - 120 mn without disconnection or with safety disconnection |
440 Vac disconnection | |
| Residual Current LeakAge current at Uc |
none | |
| Follow current |
none | |
| Nominal discharge current 15 x 8/20 µs impulses |
5 kA | |
| Max. discharge current max. withstand @ 8/20 µs by pole |
10 kA | |
| Total lightning current max. total withstand @ 10/350 µs |
20 kA | |
| Withstand on Combinaison waveform IEC 61643-11 Class III test: 1.2/50µs - 8/20µs |
10 kV/5 kA | |
| Withstand on overvoltages IEEE C62.41.1 |
10 kV/10 kA | |
| Admissible short-circuit current |
10000 A | |
| Max. load current |
2.5 A | |
| Protection mode(s) |
MC/MD | |
| Protection level |
1.5 kV | |
| Protection level CM/DM @In (8/20µs) and @ 6kV (1.2/50µs) |
1.5 kV/ 1 kV | |
| Protection level L/PE |
1.5 kV | |
| Protection level L/N for multipolar surge protector |
1.5 kV |
| Mechanical characteristics |
Hide details
|
|---|
| Technology |
MOV+GDT | |
| Mounting |
on plate | |
| Housing material |
Thermoplastic UL94-V0 | |
| Operating temperature |
-40/+85°C | |
| Protection rating |
IP20 | |
| Failsafe behavior |
Disconnection and AC line cut-off | |
| Disconnection indicator |
Green Led OFF and AC line cut-off | |
| Voltage/operating indicator |
Green Led ON | |
| Remote signaling of disconnection |
no |
| Associated disconnection devices |
Hide details
|
|---|
| Thermal disconnector |
internal | |
| Installation ground fault breaker |
Type `S` or delayed |
| Standards compliance |
Hide details
|
|---|
| Standards compliance | IEC 61643-11 / EN 61643-11 / UL1449 4ed. |
