MLPC1-277L-V/50, MLPC1-440LY-R, MLPC2-230L-R, MLPC2-230L-V/ESP, MLPCH1-230L-V, chống sét đèn LED chiếu sáng, chống sét đèn LED
MLPC1-277L-V/50, MLPC1-440LY-R, MLPC2-230L-R, MLPC2-230L-V/ESP, MLPCH1-230L-V, chống sét đèn LED chiếu sáng, chống sét đèn LED
MLPC1-277L-V/50, MLPC1-440LY-R, MLPC2-230L-R, MLPC2-230L-V/ESP, MLPCH1-230L-V, chống sét đèn LED chiếu sáng, chống sét đèn LED
MLPC SERIES : MLPC
MLPC series Type 2 (or 3) SPD for LED lighting system Very compact - Plate mounting
MLPC1-230L-V
- Type 2 (or 3) surge protectors for LED
- Class 1
- Very compact
- Plate mounting
- Screw terminal connection
- Status indicator
- Disconnection AC end of life
- EN 61643-11 compliance
The MLPC range is a comprehensive series of AC surge protectors dedicated to LED lighting system. The MLPC are very compact to be integrated into luminaires and are available 2 modes of connection (screw terminal or spring).
Select a reference :
Citel model : MLPC1-230L-V
Part Number : 831221Click on the blocks to display detailed characteristics
| Electrical characteristics |
Hide details
|
|---|
| SPD type follow test IEC 61643-11 |
2/3 | |
| Network |
220-240 V single-phase | |
| AC system |
TT/TN | |
| Nominal line voltage |
230-277 Vac | |
| Max. AC operating voltage L-N |
320 Vac | |
| Temporary Over Voltage (TOV) Charasteristics - 5 sec. without disconnection |
580 Vac withstand | |
| Temporary Over Voltage (TOV) Charasteristics - 120 mn without disconnection or with safety disconnection |
440 Vac disconnection | |
| Temporary Over Voltage N/PE (TOV HT) without disconnection or with safety disconnection |
1200 V/300A/200 ms disconnection | |
| Residual Current LeakAge current at Uc |
none | |
| Nominal discharge current 15 x 8/20 µs impulses |
5 kA | |
| Max. discharge current max. withstand @ 8/20 µs by pole |
10 kA | |
| Total lightning current max. total withstand @ 10/350 µs |
20 kA | |
| Withstand on Combinaison waveform IEC 61643-11 Class III test: 1.2/50µs - 8/20µs |
10 kV/5 kA | |
| Withstand on overvoltages IEEE C62.41.1 |
10 kV/10 kA | |
| Admissible short-circuit current |
10000 A | |
| Max. load current |
5 A | |
| Protection mode(s) |
MC/MD | |
| Protection level |
1.5 kV | |
| Protection level CM/DM @In (8/20µs) and @ 6kV (1.2/50µs) |
1.5 kV/ 1.5 kV | |
| Protection level L/PE |
1.5 kV | |
| Protection level L/N for multipolar surge protector |
1.5 kV |
| Mechanical characteristics |
Hide details
|
|---|
| Technology |
MOV+GDT | |
| Connection to Network |
2 screw terminals opposite side in/out - wire 2.5 | |
| Mounting |
on plate | |
| Housing material |
Thermoplastic UL94-V0 | |
| Operating temperature |
-40/+85°C | |
| Protection rating |
IP20 | |
| Failsafe behavior |
Disconnection and AC line cut-off | |
| Disconnection indicator |
Led green OFF and AC network cut-off | |
| Voltage/operating indicator |
Green Led ON | |
| Remote signaling of disconnection |
no |
| Associated disconnection devices |
Hide details
|
|---|
| Thermal disconnector |
internal | |
| Installation ground fault breaker |
Type `S` or delayed |
| Standards compliance |
Hide details
|
|---|
| Standards compliance | EN 61643-11 / IEC 61643-11 |
| Certification | EAC / TUV /IMQ |
